RS-232 OR ETHERNET COMMUNICATION BOARD FOR

THERMOTRON 2800/4800 CHAMBER

Overview

This communication Board is improves board with new RS-232 technologies devices on it and includes Ethernet port for LAN communication.

This Board replaces the existing RS-232 communication board that operate (inside) with the 2800/4800 Chamber.

The RS-232 communication goes through 9 pin D-Type connector that use only 3 lines TX, RX, GND (the cable as to be cross wires( TX, RX)).

The LAN communication goes through standard Ethernet RJ-45 connector.

The RS-232 communication (Factory setup) no need any special setup for is operation only connect it to the 2800/4800 Chamber on one side and PC on the other side Then operate the control software of the 2800/4800 Chamber.

The LAN communication needs to be setup (Port and IP Address setup) in order to communicate with the 2800/4800 Chamber.